TRIFLEX H07RN-F
It is a flexible plain copper wire cable, insulated by rubber compound (Ei4 quality).
The black sheath made of polychloroprene or equivalent synthetic elastomer is water resistant (A6).
H07NR-F cable has good flexibility and mechanical resistance to abrasion, shocks, crushing and lacerations. Good resistance to atmospheric agents, grease and mineral oils. UV-resistant.
Functional characteristics
Rated voltage Uo/U: 450/750 V a.c. (for fixed and protected installation 0,6/1 kV a.c.)
Max. operating temperature:60°C (*)
(*) In the case of fixed protected installation, the cable can be used up to 85°C.
Min. operating temperature: -40°C (without mechanical shocks)
Max. short circuit temperature: 200°C
Minimum installation temperature: -25°C
Use and installation method
Mobile laying: for use indoor, outdoor, and in workshops with explosive atmospheres. Suitable for connections subject to moderate mechanical loads including electrical tools, machine tools (only for signalling and control), motors or portable machines on building sites, or agricultural applications. Recommended minimum bending radius: 6 times the cable diameter for mobile use, 4 times for static use
For fixed installation can be used in temporary buildings or work site sheds. Suitable for connecting the constructional elements of lifting devices and machines. Recommended maximum tensile stress: 15 N/mm² of the cross-section of the copper for mobile use, 50 N/mm² for static use.
TRIFLEX Plus H07RN-F
It is a flexible tinned copper wire cable (class 5), insulated by LSOH (Low Smoke Zero Halogen) rubber compound.
The sheath can be black, blue, green or red.
Triflex H07RN-F Plus has good flexibility and resistance to abrasion and to atmospheric agents, grease and mineral oils and to medium severity shocks (AG2)
It was tested and certified to be permanently submerged in salt water at 50° up to 500 meters of depth.
Special features
In addition to H07RN-F cable, H07RN-F Plus is Halogenfree and it does not propagate flame.
TRIFLEX Plus cable includes cable specifications:
H07BN4-F for heat resistant for maximum conductor temperature 90 °C
H07BB-F for resistant to heat and low temperatures (-50 °C STATIC USE ; -40 °C MOBILE USE) for a maximum conductor temperature of 90 °C
H07RN8-F for water resistant for permanent immersions, class AD8 up to 10 m. and for flexibility for minimum 100.000 alternate bending cycles for size below or equal to 4 mm² (standard required by CEI EN 50525-2-21 is 30.000 cycles)
La Triveneta Cavi certifies the usage permanently submerged, even in salt water, up to 50 bar (500 mts)
Functional characteristics
Rated voltage Uo/U: 450/750 V a.c. for fixed and protected installation 0,6/1 kV a.c.
Max. operating temperature: 90°C
Min. operating temperature: -50°C (without mechanical shocks)
Max. short circuit temperature: 250°C
Minimum installation temperature: -40°C
Recommended minimum bending radius: 6 times the cable diameter for mobile use, 4 times for static use
Recommended maximum tensile stress: 15 N/mm² of the cross-section of the copper for mobile use, 50 N/mm² for static use.
Use and installation method
The cable ensures excellent flexibility and good robustness, suitable to connect mobile machines and heavy-duty applications.
Particularly recommended for professional portable tools and signal/command transmission, for medium mechanical stress, e.g. industrial and agricultural tools, heating water systems, heating plates, industrial electrical portable tools, motors or mobile machines for building plants or agricultural applications, for fixed installation, e.g. for provisory installation on building walls, container in construction sites, suitable for cabling construction elements of lifting tools.
Fill out the form to get more info or to request a quote!